What is a thermally conductive silicone pad?
As electronic devices are increasingly pursuing high performance, miniaturization, and reliability, efficient heat dissipation has become a key challenge. As a critical thermal interface material, thermal conductive silicone pads play an indispensable role in many fields due to their excellent performance, flexibility, and ease of use.
NKS soft thermal conductive silicon pad is a kind of thermal interface with high performance. It is soft, self-sticky, and elastic. It can fill the gap between heat-generating components and heat sink, metal mechanics, and shell or other cooling devices. The heat can be transferred out speedily so as to improve the electronic components' working efficiency and prolong the life span of the equipment.
Core characteristics of thermal conductive silicone pads:
Thermal conductivity: Measured by thermal conductivity (unit: W/(m·K)). The higher the value, the stronger the heat transfer capacity. The common range is from 1.0 W/(m·K) to 15.0 W/(m·K) or higher.
Thermal resistance: A measure of the ability of the material itself and its interface to hinder heat conduction. Under the same conditions, the lower the thermal resistance, the better. The thermal resistance of the thermal conductive silicone pad is closely related to its thickness, thermal conductivity, and contact surface condition.
Softness and compressibility: Usually expressed in hardness (Shore C). Lower hardness means better compliance, can fill smaller gaps, adapt to larger tolerance changes, and curved surfaces.
Electrical insulation: High volume resistivity and breakdown voltage to ensure safe electrical isolation between components.
Reliability: High and low temperature resistance (typical operating range -40°C to 220°C+), aging resistance, good weather resistance, and long service life.
Ease of use: Can be prefabricated into various shapes and sizes (sheets, coils, die-cut parts), with self-contained micro-adhesiveness or with adhesive backing for easy installation and replacement.
Low stress: Compared with hard thermal conductive materials, it has less stress on sensitive components.
Main application areas of thermal conductive silicone pads
Consumer electronics: smartphones, tablets, laptops (CPU/GPU cooling), game consoles, routers, set-top boxes.
Communication equipment: 5G base stations, optical modules, switches, servers (chipsets, memory, VRM cooling).
Automotive electronics: new energy vehicle battery management system, motor controller, on-board charger, LED lights, infotainment system (power device cooling).
Industrial electronics: inverter, servo drive, PLC, industrial computer, power module (MOSFET, IGBT cooling).
LED lighting: heat dissipation between the substrate and the housing of LED lamps.
New energy: photovoltaic inverter, power device cooling in energy storage system (PCS).
How to choose thermal conductive silicone pads correctly?
Choosing a suitable thermal conductive silicone pad is crucial to the heat dissipation effect, and comprehensive considerations are required:
Thermal conductivity: Select according to the power consumption and allowable temperature rise requirements of the heat source. High thermal power consumption requires high thermal conductivity.
Thickness: Select according to the actual assembly gap between the heat source and the heat sink. Thermally conductive silicone pads need to be compressed to a certain percentage (usually 10-30%) to achieve optimal thermal performance and mechanical stability. Too thick or too thin will significantly increase thermal resistance.
Hardness (compression rate): For applications with large gap changes or uneven surfaces, choose softer, more compressible thermally conductive silicone pads to ensure that the gaps are filled. Slightly harder ones can be selected for situations where support is required.
Electrical performance: Ensure that the breakdown voltage meets the system insulation requirements. High-voltage applications require special attention.
Flame retardant grade: Select according to industry standards and terminal product safety requirements.
Size and shape: Select standard sheets/rolls or custom die-cut parts according to the size and shape of the contact surface. Accurate die-cutting can reduce waste and improve assembly efficiency.
Long-term reliability requirements: Environmental factors such as high temperature, low temperature, hot and cold cycles, vibration, etc., will affect material performance. Choose a proven, reliable brand and model.
Development trend of thermal conductive silicone pad industry
Higher thermal conductivity: Continue to develop new high thermal conductivity fillers (such as graphene, modified boron nitride, etc.) and optimize the composite process to pursue higher performance limits.
Lower thermal resistance: Reduce the thermal resistance of the material body and the interface contact thermal resistance by optimizing the material formula and surface treatment technology.
Thinner: Adapt to the trend of increasingly thin and light electronic devices, and develop ultra-thin (<0.1mm) thermal conductive silicone pads that still maintain good thermal conductivity and mechanical properties.
High flexibility and low hardness: Meet the needs of wearable devices, curved screen devices, etc. for ultra-soft and highly compressible materials.
Multifunctionality: Such as materials with excellent thermal conductivity, electromagnetic shielding (EMI) or wave absorption properties.
Environmental protection and sustainability: Develop more environmentally friendly silicone substrates and fillers, and pay attention to the recyclability of materials.
Intelligent manufacturing and customization: The die-cutting process is more precise and efficient, meeting the needs of complex shapes and extremely small size components.
